GMT FRP Mold
RTM/HP RTM/ SMC/BMC/GMTGMT Mold
GMT is Glass Mat Reinforced Thermoplasitcs, a kind of sheet molding compound with fiber reinforced thermoplastic.
It is produced on huge laminators, using a thermoplastic resin and one or more forms of reinforcement.
RTM/HP RTM/ SMC/BMC/GMT
GMT Mold
GMT is Glass Mat Reinforced Thermoplasitcs, a kind of sheet molding compound with fiber reinforced thermoplastic.
It is produced on huge laminators, using a thermoplastic resin and one or more forms of reinforcement.
The process yields a lightweight, partially consolidated, semifinished composite in sheet form. Most forms are produced to 1,300 mm to 1,400 mm widths. However, some newer forms are made to greater but proprietary widths.
The sheet stock may be cut to size to suit placement in the tool for a specific application and also can incorporate a decorative or functional surface laminated to one side.
GMT Mold makes possible the production of large parts with low tooling costs and fast cycle times via compression molding.
The potential for parts consolidation presents the opportunity to further reduce weight and cost.
What’s the advantage of GMT mould parts?
Utilization of regenerated、Low forming pressure、Long storage period、Short shaping cycle、High production efficiency
What’s the mostly application of GMT mold?
GMT mold is mostly used in Automotive and building&construction, chemical industry, packaging, sport equipment, etc.
What's the GMT tooling process?
When GMT mold is made, preheated gmt material will be puted on the center(cavity)between the top mold and bottom mold, a pressing machine with 2500 Ton force make them into the finished products.
複製產品鏈接
長按圖片保存/分享
詢盤
谘詢表單：
谘詢內容：
你還沒有添加任何產品
詢盤
谘詢表單：
谘詢內容：
你還沒有添加任何產品
86-13143415646
Contact：
Tel: 86-755-23000620 Fax: 86-755-23000621
Email:info@galaxy3dm.com/info@seetoptech.com
Address: A3 , Dingfeng Industrial Zone, Fuyong Town, Shenzhen, China
Galaxy 3D Manfacturing Solution
Copyright (©) 2020 Shenzhen Seetop Technology Co.,Limited
